4 Channel 12v DC wireless relay Remote control Switch Long Range 300m 433MHz

Wireless module using a remote control to control relays using a remote. It can be used as a 4 channel wireless switchboard

Specification

Clearing All Stored Transmitters:
Push the learning button on the receiver 8 times, and the codes will be cleared.
After clearing the stored transmitters, all transmitters will need to be relearned by the receiver.

• Learning the transmitter :(momentary Mode) Press the learning key on the receiver 1 time, Wait for a moment, the LED will be off, and it comes into a learning state.
• Press the remote button, LED indicator on the receiver board will flash and then come off. After 3 seconds, the LED indicator will be on again, learning successfully.
• Learning the transmitter : ( Toggle Mode ) Press the learning key on the receiver 2 times, Wait for a moment, the LED will be off, and it comes into a learning state.
• Press the remote button, LED indicator on the receiver board will flash and then come off.
• After 3 seconds, the LED indicator will be on again, learning successfully.
• Learning the transmitter : ( Latched Mode )
• Note: When you choose Interlocking mode, in order to learn more remote control, you need to learn two different buttons, the first time learn is for €š¬œON€š¬�, and the second time learnt it for €š¬œOFF€š¬�.

For example : button A = ON , button B = OFF
Push the learning key on the receiver 3 times, and the LED (on the Receiver)will blink 3 times. When the LED is on, press the button of the remote control(You want to let it learn), Push the remote button A, LED flashes 3 times . Push the remote button B, Led flash 3 times. After 3 seconds, the LED indicator will be off, Learning to succeed.

Package Included 

• 1 x Receiver (with cover)
• 1/2/3 x Transmitter ( without Battery)
  

  Applications

  Garage Door, Household Electrical Appliances, RGB lights.