Quadcopter Economy Combo Kit for Beginners

DESCRIPTION

This is Quadcopter Economy Combo Kit for Beginners which will help you become a quadcopter pilot. This Economy kit has very good products and is available at affordable cost.

For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be extremely daunting. Trying to figure out what to buy and what parts will work together is tough, especially for people who don’t come from a background in radio controlled planes or helicopters. For the people who want to build a quadcopter but don’t know where to start. It can be frustrating trying to sort things and figure out what to do.

We’ve heard from a lot of peoples who are in similar positions and this bunch of products is designed to spell out exactly what you need for your quadcopter build. While we will recommend a complete list of specific parts that we have tested for a complete quadcopter build, the main purpose providing an Quadcopter Economy Combo Kit needed to build a quadcopter.

Here’s what an Economy Kit contains:

Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB

Every quadcopter or other multirotor aircraft needs a frame to house all the other components. Things to consider here are weight, size, and materials. This Q450 QUADCOPTER FRAME is a well thought out 450mm quad frame built from quality materials. The main frame is glass fiber while the arms are constructed of ultra-durable polyamide nylon. This version 3 of the Q450 QUADCOPTER FRAME features integrated PCB connections for direct soldering of your ESCs. This eliminates the need for a power distribution board or messy multi-connectors keeping your electronics layout very tidy.

A2212/10T/13T 1000kv Brushless Motor With Soldered Connector

The motors have an obvious purpose: to spin the propellers. There are many motors available on the techtonics.in suitable for quadcopters, and this A2212 1000KV Brushless Motor is one of them which is included in this kit. Motors are rated by kilovolts, and the higher the kV rating, the faster the motor spins at a constant voltage. The A2212 1000KV Brushless Motor for the airplane aircraft quadcopter. A2212 1000KV Brushless Motor runs with 80% maximum efficiency, 4-10A max efficiency current, and 12A / 60s current capacity.

Propeller Pairs 1045(10X4.5) Black (1CW+1CCW)

The Propellers 1045(10X4.5) Black is the high-quality propellers specially designed for multi-copters. These Propellers are light in weight and high strength propeller has a 15° angle design at the end of the propeller to avoid whirlpool while the multi-copter is flying. They are useful in drones as well as in multi-copters.

SimonK 30A BLDC ESC Electronic Speed Controller

The electronic speed control, or ESC, is what tells the motors how fast to spin at any given time. You need four ESCs for a quadcopter, one connected to each motor. The ESCs are then connected directly to the battery. Simonk 30A BLDC ESC Electronic Speed Controller is specifically made for quadcopters and multi-rotors and provides faster and better motor speed control giving better flight performance compared to other available ESCs. Simonk 30A BLDC ESC Electronic Speed Controller can drive motors which consume up to 30A current and works on 2S-3S LiPo batteries. It has an onboard BEC which provides regulated 5V(2A max draw) to power the flight controller and other onboard modules. It can be used to control our brushless motors with a 2S-3S LiPo(make sure motor doesn’t draw more than 30A). This particular ESC is recommended with A2212 brushless motor (1000kv, 1400kv,2200kv).

APM 2.8 Multicopter Flight Controller with Built-in Compass

The flight control board is the ‘brain’ of the quadcopter. It houses the sensors such as gyroscopes and accelerometers that determine how fast each of the quadcopter’s motors spin. Flight control boards range from simple to highly complex. APM 2.8 Multicopter Flight Controller with Built-in Compass is the new APM 2.8 flight controller. The sensors are exactly the same as the APM 2.6 flight controller, however, this has the option to use the built-in compass, or external compass via a jumper. This makes the APM 2.8 ideal for use with multi-copters and rovers.

The APM 2.8 Multicopter Flight Controller is a complete open source autopilot system and the bestselling technology that won the prestigious Outback Challenge UAV competition. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints.

CT6B FlySky 2.4Ghz 6CH Transmitter with FS-R6B Receiver

The radio transmitter and receiver allow you to control the quadcopter. There are many suitable models available at techtonics.in, but you will need at least four channels for a basic quadcopter. We recommend using a radio with 6 channels, so there is more flexibility.

CT6B FlySky 2.4Ghz 6CH Transmitter is the popular 6 Channel Radio CT6B manufactured by FlySky.CT6B FlySky 2.4Ghz 6CH Transmitter is an entry-level 2.4 GHz radio system offering the reliability of 2.4 GHz signal technology and a receiver with 6 channels.

It can be powered by 8 x AA Size Batteries or a 12V Power Supply. It comes with a trainer port to help beginners learn flying. It can be configured by connecting it to the computer. Use the T6 config software to configure your radio on a computer.

3000mAh 3S 30C/60C Lithium polymer battery Pack (LiPo)

Quadcopters typically use LiPo batteries which come in a variety of sizes and configurations. We typically use 3S1P batteries, which indicates 3 cells in parallel. Each cell is 3.7 volts, so this battery is rated at 11.1 volts. LiPo batteries also have a C rating and a power rating in mAh (which stands for milliamps per hour). The C rating describes the rate at which power can be drawn from the battery, and the power rating describes how much power the battery can supply.

3000mAh 3S 30C/60C Lithium polymer battery Pack (LiPo) batteries are known for performance, reliability, and price. Orange batteries deliver the full rated capacity at a price everyone can afford.

3000mAh 3S 30C/60C Lithium polymer battery Pack (LiPo) batteries are equipped with heavy duty discharge leads to minimize resistance and sustain high current loads. Orange batteries stand up to the punishing extremes of aerobatic flight and RC vehicles. Each pack is equipped with gold plated connectors and JST-XH style balance connectors.

Lipo Voltage Checker 2-8S

Li-Po voltage checker one of the basic essential tool used for the Quadcopters, It is used to use the battery more efficiently and increase the life of the battery by proper management. It is a very compact module that you can use it with much ease as you wish. 2-8S Cell Checker with low voltage alarm features loud twin piezo alarms to notify you once your cells reach a user defined voltage. You can customize the alarm to sound at a voltage between 2.7v~3.8v per cell in 0.10v increments by pressing the setting mode button.

Note: Any one of the following chargers are required to Charge/Discharge the different cells of  Li-PO batteries which are not included in this pack. Used for better operation and also to enhance the life of the Li-PO battery for this we need a Balance Charger. We suggest you buy any of the following battery Charger/Discharger according to your choice.

• IMAX B3 Charger/Discharger 1-6 Cells
• IMAX B6AC Charger/Discharger 1-6 Cells

All the above products are essential and main components of Quadcopter, including them all that you wish and want to make and modify i.e from the solder wire of soldering gun to the Gimbal to house your camera in the Quadcopter is available at techtonics.in

Package Includes:

• 1 x Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
• 4 x A2212 1000KV Brushless Motor
• 2 x Propellers 1045(10X4.5) Black 1CW+1CCW
• 4 x SimonK 30A BLDC ESC Electronic Speed Controller
• 1 x APM 2.8 Multicopter Flight Controller with Built-in Compass
• 1 x CT6B FlySky 2.4Ghz 6CH Transmitter with FS-R6B Receiver
• 1 x 3000mAh 3S 30C/60C Lithium polymer battery Pack (LiPo)
• 1 x Lipo Voltage Checker 2-8S

Specification and Features :

1. Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB

• Materials: glass fiber + polyamide nylon
• Frame Weight: 280g.
• Height: 55mm
• Colored arms for orientation to keep you flying in the right direction.
• Power distribution board included in this item(inbuilt PCB).
• Pre-threaded brass sleeves for all frame bolts.
• Large mounting tabs on main frame bottom plate for easy camera mounting.

2. A2212 1000KV Brushless Motor

• KV: 1000
• MAX Efficiency: 80%
• MAX Efficiency Current: 4-10A (>75%)
• Current Capacity: 12A / 60s
• No Load Current: 10 V : 0.5 A

3. Propellers 1045(10X4.5) Black (1CW+1CCW)

• Weight (1 pair) : 22 gm.
• Shaft diameter(mm): 7-(Flat Side) and 8-(Round Side)
• Total length : 10 inch (254 mm)
• Very strong and lightweight.

4. SimonK 30A BLDC ESC Electronic Speed Controller

• Current: 30-40 A
• Constant Current: 30 A Maximum (40A for maximum 10sec)
• BEC: 3 A
• Good Speed Control
• Excellent Stability Control

5. APM 2.8 Multicopter Flight Controller with Built-in Compass 

• Power supply: LP2985-3.3.
• Max voltage: 16V.
• Port: MUX (UART0, UART2, mnnI2, and OSD are optional, OSD is the defaulted output).
• Arduino Compatible!
• Includes 3-axis gyro, accelerometer, along with a high-performance barometer
• Onboard 4 MegaByte Dataflash chip for automatic data logging.
• Optional off-board GPS, a uBlox LEA-6H module with Compass.

6. CT6B FlySky 2.4Ghz 6CH Transmitter with FS-R6B Receiver

• STICK MODE: Left hand or Right hand
• MODULATION: Frequency Modulation
• ANTENNA LENGTH: 115cm/26mm
• CODE TYPE: PPM/GFSK
• POWER: 12V DC
• RF POWER: Less than 0.8W
• CHANNELS: 6 channels
• High receiving sensitivity.
• 8 model memory, digital control.

7. 3000mAh 3S 30C/60C Lithium polymer battery Pack (LiPo)

• Model No : 3000mAh 30C 3S1P
• Capacity : 3000mAh
• Max Continuous Discharge : 30C(90.0A)
• Balance Plug : JST-XH
• Max Burst Discharge : 60C(180.0A)
• Discharge Plug : XT-60
• Charge Rate : 1-3C Recommended, 5C Max

8. Lipo Voltage Checker 2-8S

• Input: 2-8S
• Battery type: Lipo/LiFe/Li-ion
• Cell Voltage Display Range: 0.5v-4.5v
• Total Voltage Display Range: 3.7-36v
• Alarm set values: Off or 2.7-3.8v