| Local display |
With |
| Number or control scheme lines |
0…500 with FBD programming
0…240 with ladder programming |
| Cycle time |
6…90 ms |
| Backup time |
10 years at 25 °C |
| Clock drift |
12 min/year at 0…55 °C
6 s/month at 25 °C |
| Checks |
Program memory on each power up |
| [Us] rated supply voltage |
24 V |
| Supply voltage limits |
19.2…30 V |
| Maximum supply current |
190 mA (without extension)
300 mA (with extensions) |
| Power dissipation in W |
10 W with extensions
6 W without extension |
| Reverse polarity protection |
With |
| Discrete input number |
16 conforming to IEC 61131-2 Type 1 |
| Discrete input type |
Resistive |
| Discrete input voltage |
24 V DC |
| Discrete input current |
4 mA |
| Counting frequency |
1 kHz for discrete input |
| Voltage state 1 guaranteed |
>= 15 V for I1…IA and IH…IR discrete input circuit
>= 15 V for IB…IG used as discrete input circuit |
| Voltage state 0 guaranteed |
<= 5 V for I1…IA and IH…IR discrete input circuit
<= 5 V for IB…IG used as discrete input circuit |
| Current state 1 guaranteed |
>= 1.2 mA (IB…IG used as discrete input circuit)
>= 2.2 mA (I1…IA and IH…IR discrete input circuit) |
| Current state 0 guaranteed |
<= 0.5 mA (IB…IG used as discrete input circuit)
<= 0.75 mA (I1…IA and IH…IR discrete input circuit) |
| Input compatibility |
3-wire proximity sensors PNP for discrete input |
| Analogue input number |
6 |
| Analogue input type |
Common mode |
| Analogue input range |
0…10 V
0…24 V |
| Temperature probe type |
NTC 10k at 25 °C
NTC 1000k at 25 °C
KTY81 210/220/221/222/250
Pt 500 |
| Maximum permissible voltage |
30 V for analogue input circuit |
| Analogue input resolution |
8 bits |
| LSB value |
39 mV for analogue input circuit |
| Conversion time |
Smart relay cycle time for analogue input circuit |
| Conversion error |
+/- 5 % at 25 °C for analogue input circuit
+/- 6.2 % at 55 °C for analogue input circuit |
| Repeat accuracy |
+/- 2 % at 55 °C for analogue input circuit |
| Operating distance |
10 m between stations, with screened cable (sensor not isolated) for analogue input circuit |
| Input impedance |
12 kOhm for IB…IG used as analogue input circuit
12 kOhm for IB…IG used as discrete input circuit
7.4 kOhm for I1…IA and IH…IR discrete input circuit |
| Number of outputs |
10 relay |
| Output voltage limits |
24…250 V AC (relay output)
5…30 V DC (relay output) |
| Contacts type and composition |
NO for relay output |
| Output thermal current |
5 A for 2 outputs for relay output
8 A for 8 outputs for relay output |
| Electrical durability |
AC-12: 500000 cycles at 230 V, 1.5 A for relay output conforming to IEC 60947-5-1
AC-15: 500000 cycles at 230 V, 0.9 A for relay output conforming to IEC 60947-5-1
DC-12: 500000 cycles at 24 V, 1.5 A for relay output conforming to IEC 60947-5-1
DC-13: 500000 cycles at 24 V, 0.6 A for relay output conforming to IEC 60947-5-1 |
| Switching capacity in mA |
>= 10 mA at 12 V (relay output) |
| Operating rate in Hz |
0.1 Hz (at Ie) for relay output
10 Hz (no load) for relay output |
| Mechanical durability |
10000000 cycles for relay output |
| [Uimp] rated impulse withstand voltage |
4 kV conforming to EN/IEC 60947-1 and EN/IEC 60664-1 |
| Clock |
With |
| Response time |
10 ms (from state 0 to state 1) for relay output
5 ms (from state 1 to state 0) for relay output |
| Connections – terminals |
Screw terminals, 1 x 0.2…1 x 2.5 mm² (AWG 25…AWG 14) semi-solid
Screw terminals, 1 x 0.2…1 x 2.5 mm² (AWG 25…AWG 14) solid
Screw terminals, 1 x 0.25…1 x 2.5 mm² (AWG 24…AWG 14) flexible with cable end
Screw terminals, 2 x 0.2…2 x 1.5 mm² (AWG 24…AWG 16) solid
Screw terminals, 2 x 0.25…2 x 0.75 mm² (AWG 24…AWG 18) flexible with cable end |
| Tightening torque |
0.5 N.m |
| Overvoltage category |
III conforming to IEC 60664-1 |
| Product weight |
0.4 kg |
Reviews
There are no reviews yet.