No products in the cart.
CJMCU 9930 APDS-9930 Digital Proximity And Ambient Light Sensor For Arduino
Roll over image to zoom in
₹249.00₹299.00 (-17%)
This is CJMCU 9930 APDS-9930 Digital Proximity And Ambient Light Sensor For Arduino. The APDS-9930 provides digital ambient light sensing (ALS), IR LED and a complete proximity detection system in a single 8 pin package. The proximity function offers plug and play detection to 100 mm (without front glass) thus eliminating the need for factory calibration of the end equipment or sub-assembly.
The proximity detection feature operates well from bright sunlight to dark rooms. The wide dynamic range also allows for operation in short distance detection behind dark glass such as a cell phone.
In addition, an internal state machine provides the ability to put the device into a low power mode in between ALS and proximity measurements providing very low average power consumption. The ALS provides a photopic response to light intensity in very low light condition or behind a dark faceplate.
Features :
> Optical modules integrated with ALS, infrared LEDs and proximity detectors
>Ambient Light Sensing (ALS)
- Approximate human visual response
- Programmable interrupt capability with upper and lower thresholds
- Up to 16-bit resolution
- High sensitivity operation behind dark glass
- 0.01lux low lumen performance
> Proximity detection
- Fully calibrated to 100 mm detection
- Integrated infrared LED and synchronous LED driver
- Eliminates factory calibration of the proximity sensor
> Programmable wait timer
- Wait for state power consumption – 90μA typical
- Programmable range from 2.7 ms to more than 8 seconds
- I2C interface compatible
- Up to 400kHz (I2C fast mode)
- Dedicated interrupt pin.
Specifications:
Operating voltage (v) | 2.8 ~ 3.8 |
Resolution | 16-Bit |
Model | APDS-9930 |
Wait State Power | 90 µA |
Operating frequency (KHz) | 400 |
Length (mm) | 18.3 |
Width (mm) | 15 |
Height (mm) | 4 |
Weight (gm) | 2 |
Pin Out Details:
Pin Label | Description |
VL | Optional power to the IR LED. Must be 3.0 – 4.5V |
GND | Â Ground. |
VCC | Must be 2.4 – 3.6V |
SDA | I2C data |
SCL | I2C clock |
INT | External interrupt pin. |
Applications:
- Adjustable light mobile phone backlight
- Notebook / display security
- automatically enabled hands-free mode
- Automatic menu pop up
- Digital camera eye sensor.
Package Includes :
- 1 x CJMCU 9930 APDS-9930 Digital Proximity And Ambient Light Sensor.
Reviews
There are no reviews yet.