No products in the cart.
FlexiForce A401 Large Force Sensor
Roll over image to zoom in
₹1,110.00₹1,599.00 (-31%)
FlexiForce A401 Large Force Sensor has a 2-pin connector. This is our standard sensor with the largest sensing area: 25.4 mm (1 in.). A401 sensors are available in one force range: 111 N (0 – 25 lb).* The force ranges stated are approximations. The dynamic range of this large force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor.
Measurement ranges of 0-1 lb and 0- 7000 lb are achievable with the A401 sensor by utilizing the recommended circuitry. The force range can be extended by reducing the drive voltage, VT, or the resistance value of the feedback resistor, RF. Conversely, the sensitivity can be increased for measurement of lower forces by increasing VT or RF
How to Adjust the Force Range:
* Measurement ranges of 0-1 lb and 0-7000 lb are achievable with the A401 sensor by utilizing the recommended circuitry. The force range can be extended by reducing the drive voltage, VT, or the resistance value of the feedback resistor, RF. Conversely, the sensitivity can be increased for measurement of lower forces by increasing VT or RF.
Typical Performance
- Linearity (Error) : < ±3% of Full Scale (Line drawn from 0 to 50% load)
- Repeatability : < ±2.5% (Conditioned Sensor, 80% of Full Force Applied)
- Hysteresis : < 4.5 % of Full Scale (Conditioned Sensor, 80% of Full Force Applied)
- Drift : <5% / logarithmic time (Constant Load of 111 N (25 lb))
- Response Time : < 5 µsec (Time required for the sensor to respond to an input force; Impact load - recorded on Oscilloscope)
- Operating Temperature : -40°C - 60°C (-40°F - 140°F)
- Acceptance Criteria : ± 40% sensor-to-sensor variation
- Durability : ≥ 3 million actuations (Perpendicular load, room temperature, 22 N (5 lb))
- Temperature Sensitivity : 0.36%/°C (± 0.2%/°F) (Conductive heating)
Applications:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
Package Includes:
- 1 x FlexiForce A401 Force Sensor
Flexi Force Type | Tekscan A401 |
Force Range | 0-111N (0 – 11 Kg) |
Connector | 2-pin Male Square Pin |
Length | 56.9 mm |
Width (mm) | 31.8 mm |
Thickness | 0.203 mm |
Operating Voltage | 0.25-1.25VDC (0.5V Typical) |
Max Current | 2.5mA |
Drift | < 5% per logarithmic time scale |
Hysteresis | < 4.5 % of full scale |
Linearity (Error) | < ±3% of full scale |
Pin Spacing | 2.54 mm |
Repeatability | < ±2.5% |
Response Time | < 5μsec |
Sensing Area | 25.4 mm diameter |
Surface Layer | Polyester |
Operating Temperature Range | -40 ~ +60°C |
RoHS Compliant | Yes |
Reviews
There are no reviews yet.