No products in the cart.
R307 Fingerprint Sensor Module
Roll over image to zoom in
₹1,069.00₹1,299.00 (-18%)
R307 Fingerprint Sensor Module is a fingerprint sensor with a TTL UART interface for direct connections to microcontroller UART or to PC through MAX232 / USB-Serial adapter. The user can store the fingerprint data in the module and can configure it in 1:1 or 1: N mode for identifying the person.
The FP module can directly interface with 3.3 or 5v Microcontroller. A level converter (like MAX232) is required for interfacing with PC serial port.
Integrated image collecting and algorithm chip together, ALL-in-One Fingerprint reader can conduct secondary development, can be embedded into a variety of end products. Users can conduct secondary development, can be embedded into a variety of end products, such as access control, attendance, safety deposit box, car door locks
Features:
- Integrated image collecting and algorithm chip together, ALL-in-One.
- The fingerprint reader can conduct secondary development, can be embedded into a variety of end products.
- Low power consumption, low cost, small size, excellent performance.
- Professional optical technology, precise module manufacturing techniques.
- Good image processing capabilities can successfully capture an image up to resolution 500 dpi.
Specifications:
Operating voltage (v) | 4.2 ~ 6 VDC |
Current consumption | ≤75mA |
Verification Speed | 0.2 sec |
Scanning Speed | 0.3 sec |
Character file size | 256 bytes |
Template size | 512 bytes |
False Acceptance Rate (FAR) | ≤0.0001% |
False Rejection Rate (FRR) | ≤0.1% |
Resolution | 500 DPI |
Operating Temperature | -20 ~ +50 °C |
Length (mm) | 46 |
Width (mm) | 21 |
Height (mm) | 23.5 |
Weight (gm) | 20 |
Pinouts :
- 5V : Regulated 5V DC
- GND : Common Ground
- TXD : Data output - Connect to MCU RX
- RXD : Data Input - Connect to MCU TX
- TOUCH : Active Low output when there is touch on sensor by finger
- 3V : Use this wire to give 3.3V to sensor instead of 5V
USB Cable Connections are 5V/D+/D-/GND (Optional)
Package Includes:
- 1 x R307 Optical Fingerprint Reader Sensor Module.
- 1 x Connecting Cable(6-pin).
Reviews
There are no reviews yet.