No products in the cart.
XH-W1219 12V Digital Red+Green Display Temperature Controller Module W/ NTC Waterproof Temperature Sensor
Roll over image to zoom in
₹380.00₹450.00 (-16%)
This is XH-W1219 12V Digital Red+Green Display Temperature Controller Module W/ NTC Waterproof Temperature Sensor. The XH-W1219 thermostat module with its µC and I/O (sensor input, keys, double display, relay) can be re-programmed for automation tasks, and it’s easy to work with.
Digital thermostat module. The temperature controller/switch with waterproof NTC probe and integrated LED display in red and green.
Specifications:
| Model | XH-W1219 |
| Control Range(°C) | -50 to +110 |
| Control Precision(°C) | 0.1 |
| Measuring Input | NTC10K Sensor |
| High-Temperature Alarm(°C) | -49 to +110 |
| Input Voltage (V) | 12 |
| Output Type | Relay Output 10A (max) |
| Return Difference Setting(°C) | 0.1 to 30 |
| Delay Starting(min) | 0 to 10 |
| Temperature Calibration(°C) | -10 to 10 |
| Length (mm) | 60 |
| Width (mm) | 44 |
| Height (mm) | 17 |
| Weight (gm) | 22 |
Button Functions :
P0(Temperature Control Mode)
- When first use this product; if you are using it for heating, please set H, if using it for cooling, please set C
P1(Return Difference Setting)
- Long press SET key entering into the internal setting, choose P1 setting; then press SET key to achieve return difference value setting
P2(Temperature Calibration)
- This function is for temperature calibration. If detection temperature and the actual temperature is different, then users can apply this function to calibrate
P3(Delay Start)
- This function is for compressor cooling
P4(Set High-Temperature Alarm Value)
- When the actual temperature is higher than this value, the screen will flash and sound an alarm
Note:Â This board is Nuvoton based.
Package Includes :
- 1 x 12V Digital Red+Green Display Temperature Controller Module
- 1 x NTC Waterproof Temperature Sensor
Reviews
There are no reviews yet.